What are the national standards for ozone detectors?

With the tightening of environmental protection policies and the enhancement of health awareness, the demand for ozone detectors in industrial safety, environmental monitoring and household scenarios has soared. To ensure the accuracy and compliance of equipment, the state has updated a number of national standards. The core standards of ? include ? :

I. ? Chinese National Standard (Mandatory/Recommended) ?

Youdaoplaceholder0 1.GB/T 18883-2025 Indoor air quality standard ?

Youdaoplaceholder0 Core content ? :

Ozone concentration limit: 1-hour average ≤0.16mg/m3 (approximately 0.08ppm).

Requirements for the testing instrument: accuracy ±5%, range 0-0.5ppm.

Youdaoplaceholder0 applicable scenarios ? : air quality monitoring in homes, offices and public places.

2?.GB 12358-2023 "Ozone Detection and Alarm Instrument for Workplaces" ?

Youdaoplaceholder0 Core content ? :

Ozone safety threshold for industrial scenarios: 8-hour average ≤0.1ppm, short-term exposure ≤0.3ppm.

Instrument requirements: Explosion-proof certification, sound and light alarm, error ≤±3%.

Youdaoplaceholder0 applicable scenarios ? : industrial environments such as chemical engineering, printing, water treatment, etc.

3?.GB/T 37820-2025 Technical specification for electrochemical Ozone detector ?

Youdaoplaceholder0 Core content ? :

The sensor life is no less than 2 years, and the calibration cycle is no more than 6 months.

Data storage ≥ 10,000 entries, supporting Bluetooth /WiFi transmission.

Ii. Youdaoplaceholder0 Environmental Protection and Industry Standards ?

Youdaoplaceholder0 1.HJ 590-2024 Technical Specification for Automatic Monitoring of Ozone in Ambient air ?

Youdaoplaceholder0 Core content ? :

The ultraviolet absorption method is used as the reference method, with a resolution of ≤0.001ppm.

It should have the function of temperature/humidity compensation.

Youdaoplaceholder0 2.JB/T 12955-2025 General Specification for Ozone Detectors for industrial use ?

Youdaoplaceholder0 Core content ? :

Dust and water resistance grade ≥IP65, response time ≤15 seconds.

Supports multi-gas module expansion (such as VOCs, CO?).

Iii. Youdaoplaceholder0 International standard reference ?

Youdaoplaceholder0 1. ISO 16000-38:2025 "indoor air - methods for ozone detection" ?

The ultraviolet light absorption method is required, with an error within ±2%.

Youdaoplaceholder0 2.EPA 40 CFR Part 50 (EPA) ? : Certification standard for ozone monitoring equipment.

Iv. Dynamics of New Standards Added in 2025 ?

Youdaoplaceholder0 Intelligent Internet of Things requirements ? : Add data encryption and remote calibration protocols (such as GB/T 2025-xxxx).

Youdaoplaceholder0 Green manufacturing standards ? : energy consumption and material recovery rate limits in the production process (e.g. HJ 1102-2025).

V. ? Selection and Compliance Advice ?

Youdaoplaceholder0 priority matching scenario ? :

For home use, choose ?GB/T 18883-2025? certified model.

Industrial selection ?GB 12358-2023? + ? explosion-proof certification ? (e.g. Ex ib IIB T4).

Youdaoplaceholder0 Verification mark ? : Check the "CMA" or "CNAS" test report number on the product nameplate.

Youdaoplaceholder0 Local requirements ? : In regions such as the Beijing-tianjin-hebei area and the Yangtze River delta, additional ? regional environmental protection standards ? (such as AQI linked alarm) may be added.

Appendix: A Guide to Avoiding Pitfalls

? beware of "conforming to old national standards" (such as GB/T 18883-2002 which has been abolished).

? international brands need to confirm the Chinese localization certification (such as CCC compulsory certification) additionally.

隨著環保政策趨嚴和健康意識提升，臭氧檢測儀在工業安全、環境監測及家庭場景的應用需求激增。為保障設備精準性與合規性，國家已更新多項國家標準，?核心標準包括?：

一、?中國國家標準（強制性/推薦性）?

?1.GB/T 18883-2025《室內空氣質量標準》?

?核心內容?：

臭氧濃度限值：1小時平均≤0.16mg/m3（約0.08ppm）。

檢測儀器要求：精度±5%，量程0-0.5ppm。

?適用場景?：家庭、辦公室、公共場所空氣質量監測。

2?.GB 12358-2023《作業場所臭氧檢測報警儀》?

?核心內容?：

工業場景臭氧安全閾值：8小時平均≤0.1ppm，短時接觸≤0.3ppm。

儀器要求：防爆認證、聲光報警、誤差≤±3%。

?適用場景?：化工、印刷、水處理等工業環境。

3?.GB/T 37820-2025《電化學式臭氧檢測儀技術規范》?

?核心內容?：

傳感器壽命≥2年，校準周期≤6個月。

數據存儲≥1萬條，支持藍牙/WiFi傳輸。

二、?環保與行業標準?

?1.HJ 590-2024《環境空氣臭氧自動監測技術規范》?

?核心內容?：

紫外吸收法為基準方法，分辨率≤0.001ppm。

需具備溫度/濕度補償功能。

?2.JB/T 12955-2025《工業用臭氧檢測儀通用規范》?

?核心內容?：

防塵防水等級≥IP65，響應時間≤15秒。

支持多氣體模塊擴展（如VOCs、CO?）。

三、?國際標準參考?

?1. ISO 16000-38:2025《室內空氣-臭氧檢測方法》?

要求紫外光吸收法，誤差±2%以內。

?2.EPA 40 CFR Part 50（美國環保署）?：臭氧監測設備認證標準。

四、?2025年新增標準動態?

?智能物聯要求?：新增數據加密、遠程校準協議（如GB/T 2025-xxxx）。

?綠色制造標準?：生產過程中能耗與材料回收率限制（如HJ 1102-2025）。

五、?選擇與合規建議?

?優先匹配場景?：

家用選 ?GB/T 18883-2025? 認證機型。

工業選 ?GB 12358-2023? + ?防爆認證?（如Ex ib IIB T4）。

?驗證標志?：檢查產品銘牌的“CMA”或“CNAS”檢測報告編號。

?地方要求?：京津冀、長三角等地可能附加 ?區域環保標準?（如AQI聯動報警）。

附：避坑指南

? 警惕“符合舊國標”（如GB/T 18883-2002已廢止）。

? 國際品牌需額外確認中國本地化認證（如CCC強制認證）。